fix: corrected share links

dishwasher-utilization-and-maintenance/dishwasher-utilization-and-maintenance.md

@@ -4,6 +4,7 @@ permalink: /internal/lab/dishwasher-utilization-and-maintenance/
 shortcut: lab:dishwasher-utilization-and-maintenance
 redirect_from:
   - /cards/lab:dishwasher-utilization-and-maintenance
+  - /internal/cards/lab:dishwasher-utilization-and-maintenance
 ---
 
 # Dishwasher utilization and maintenance
@@ -160,4 +161,4 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 6.	Then, pull out the micro-fine filter together with the flat filter
 7.	Clean the filter
 8.	Replace the filters by performing the above steps in the reverse order
-9.	Ensure that the filters sit flat in the base of the wash cabinet
+9.	Ensure that the filters sit flat in the base of the wash cabinet
\ No newline at end of file

personal-alert-safety-system/personal-alert-safety-system.md

@@ -4,6 +4,7 @@ permalink: /internal/lab/personal-alert-safety-system/
 shortcut: lab:personal-alert-safety-system
 redirect_from:
   - /cards/lab:personal-alert-safety-system
+  - /internal/cards/lab:personal-alert-safety-system
 ---
 
 # Personal alert safety system (PASS)
@@ -193,4 +194,4 @@ If the device is configured to require a periodic check-in, a low battery shutdo
 |----|------|---------|----------------|
 |**Pending alarm**|Slow alarm pattern|Single repeating vibration|Alarm light array slow flash (red)|
 |**High alarm**| Fast alarm pattern| Double repeating vibration|Alarm light array fast flash (red)|
-|**Low battery**|Single beep once every 5 minutes|No vibration|Charge light, single flash once every 5 minutes|
+|**Low battery**|Single beep once every 5 minutes|No vibration|Charge light, single flash once every 5 minutes|
\ No newline at end of file

utilization-of-balances/utilization-of-balances.md

@@ -4,6 +4,7 @@ permalink: /internal/lab/utilization-of-balances/
 shortcut: lab:utilization-of-balances
 redirect_from:
   - /cards/lab:utilization-of-balances
+  - /internal/cards/lab:utilization-of-balances
 ---
 
 # Utilization of balances
@@ -74,4 +75,4 @@ There are such balances on the 5th floor in BT1 and on the 2nd floor in BT2.
     * When the crown is removed, carefully wipe with a damp cloth around the weighing pan
     * Carefully place the crown back
     * Always wipe the area around the balance with 70 % ethanol to remove any substance
-    * Spoons: wash them with a mild detergent and water
+    * Spoons: wash them with a mild detergent and water
\ No newline at end of file

utilization-of-pH-meter/utilization-of-pH-meter.md

@@ -4,6 +4,7 @@ permalink: /internal/lab/utilization-of-pH-meter/
 shortcut: lab:utilization-of-pH-meter
 redirect_from:
   - /cards/lab:utilization-of-pH-meter
+  - /internal/cards/lab:utilization-of-pH-meter
 
 ---
 
@@ -92,4 +93,4 @@ The calibration standard solutions are of pH 4, 7 and 10.
 
 4. Contact the quality assistant if the logbook is full.
 
-5. Would you notice any issue with the instrument, create a ticket.
+5. Would you notice any issue with the instrument, create a ticket.
\ No newline at end of file