move lab imgs to sep folders

dishwasher-utilization-and-maintenance/dishwasher-utilization-and-maintenance.md

@@ -14,7 +14,7 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 ## 1. Description
 
 <div align="center">
-<img src="img/../dishwasher_img_1.jpg" height="400">
+<img src="img/dishwasher_img_1.jpg" height="400">
 </div>
 
 1. Control panel
@@ -31,7 +31,7 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 12. Reset button
 
 <div align="center">
-<img src="img/../dishwasher_img_2.jpg" height="200">
+<img src="img/dishwasher_img_2.jpg" height="200">
 </div>
 1. On/Off button
 2. Door release
@@ -57,29 +57,29 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 
 ### **2. Selecting a program and running the dishwasher**
 
-1. Click on <img src="img/../dishwasher_img_3.jpg"> to switch on the instrument
+1. Click on <img src="img/dishwasher_img_3.jpg"> to switch on the instrument
 2. Select the “Chemistry Bio” program using the up and down arrows
 
     <div align="center">
-    <img src="img/../img/../dishwasher_img_4.jpg">
+    <img src="img/img/../dishwasher_img_4.jpg">
     </div>
 
-3. Click on <img src="img/../dishwasher_img_5.jpg">  to start the program
+3. Click on <img src="img/dishwasher_img_5.jpg">  to start the program
 
 ### **3. Cancel a program during run**
 
-1. To cancel the program, click on <img src="img/../dishwasher_img_6.jpg">
+1. To cancel the program, click on <img src="img/dishwasher_img_6.jpg">
 2. The program is then interrupted
 3. At water temperatures below 40°C, the following message appears on the display: “Program cancel (OK) or Continue (Clear)?”
 4. At water temperatures above 40°C, the following message appears on the display: “Cancel program (OK)”
-5. Confirm the program cancellation with <img src="img/../dishwasher_img_7.jpg">
+5. Confirm the program cancellation with <img src="img/dishwasher_img_7.jpg">
 6. The following message appears on the display: “Program cancelled. Water drainage”
 7. After the water has drained away, the program list returns to the display
 
 ### **4. Unloading**
 
 1. When the program is finished, the message “End of program” is displayed on the screen
-2. Click on <img src="img/../dishwasher_img_8.jpg"> to open the door
+2. Click on <img src="img/dishwasher_img_8.jpg"> to open the door
 3. Unload the tray and store the items in the cupboards
 
 ## 3. Maintenance
@@ -89,33 +89,33 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 2. If the display shows “Reactivation”, salt needs to be added to the dishwasher **directly when the message appears! Do not run a cycle when reactivation is needed!**
 3. Material needed: salt and container
     <div align="center">
-    <img src="img/../dishwasher_img_9.jpg" height="200">
+    <img src="img/dishwasher_img_9.jpg" height="200">
     </div>
 
 4. To fill the container, unscrew and remove the filter insert from the container
     <div align="center">
-    <img src="img/../dishwasher_img_10.jpg" height="200">
+    <img src="img/dishwasher_img_10.jpg" height="200">
     </div>
 
 5. Completely fill the salt container with reactivation salt (Miele, 7785780;LIMS ID: 3278) and replace the filter insert. The reactivation will only be effective if the container is completely full.
 
     <div align="center">
-    <img src="img/../dishwasher_img_11.jpg" height="300">
+    <img src="img/dishwasher_img_11.jpg" height="300">
     </div>
 
 6. Remove any mobile racks from the dishwasher cabinet
     <div align="center">
-        <img src="img/../dishwasher_img_12.jpg" height="250">
+        <img src="img/dishwasher_img_12.jpg" height="250">
     </div>
 
 7. Unscrew the plastic cap located at the top right-hand of the cabinet. A small amount of residual water will be in the cap. Take care, as it might be hot from the previous program.
     <div align="center">
-        <img src="img/../dishwasher_img_13.jpg" height="300">
+        <img src="img/dishwasher_img_13.jpg" height="300">
     </div>
 
 8. Screw the salt container firmly onto the socket
     <div align="center">
-    <img src="img/../dishwasher_img_14.jpg" height="300">
+    <img src="img/dishwasher_img_14.jpg" height="300">
     </div>
 
 9. Close the door
@@ -142,20 +142,20 @@ Utilization of the Miele dishwashers on the 5th floor of BT1 and on the 1st floo
 2.	To clean the coarse filter, press the two lugs together, remove and clean the coarse filter
 
     <div align="center">
-    <img src="img/../dishwasher_img_15.jpg" height="300">
+    <img src="img/dishwasher_img_15.jpg" height="300">
     </div>
 
 3.	To clean the flat and micro-fine filters,
 4.	Remove the fine filter which sits inside the micro-fine filter
 
     <div align="center">
-    <img src="img/../dishwasher_img_16.jpg" height="300">
+    <img src="img/dishwasher_img_16.jpg" height="300">
     </div>
 
 5.	To unscrew the micro-fine filter, turn twice counter clockwise
 
     <div align="center">
-    <img src="img/../dishwasher_img_17.jpg" height="300">
+    <img src="img/dishwasher_img_17.jpg" height="300">
     </div>
 
 6.	Then, pull out the micro-fine filter together with the flat filter