move lab imgs to sep folders

personal-alert-safety-system/personal-alert-safety-system.md

@@ -41,11 +41,11 @@ If this pre-alarm is not reset, the PASS calls the emergency number 5555.
 
 ### 1. Description of the System
 
-<img src="img/../pass_img-1.jpg">
+<img src="img/pass_img-1.jpg">
 
 ### 2. Quick user guide
 
-<img src="img/../pass_img-2.jpg">
+<img src="img/pass_img-2.jpg">
 
 ### 3. How to obtain the PASS
 
@@ -53,11 +53,11 @@ If this pre-alarm is not reset, the PASS calls the emergency number 5555.
 
     <div align="center">
 
-    <img src="img/../pass_img-3.jpg" height="300">
+    <img src="img/pass_img-3.jpg" height="300">
 
-    <img src="img/../pass_img/../pass_img-4.jpg" height="300">
+    <img src="img/pass_img/../pass_img-4.jpg" height="300">
 
-    <img src="img/../pass_img-5.jpg" height="300">
+    <img src="img/pass_img-5.jpg" height="300">
 
     </div>
 
@@ -109,7 +109,7 @@ The alarm, vibration motor and power button and SureSafe indicator light will tu
 4.	Press and hold the acknowledge button until the alarm pattern is silenced (approximately 3 seconds).
 The device will return to regular operation.
 
-5. <img src="img/../pass_img-6.jpg"> silencing the alert will not cancel it: the 5555 will still intervene.
+5. <img src="img/pass_img-6.jpg"> silencing the alert will not cancel it: the 5555 will still intervene.
 
 ### 2. Fall impact detected alert
 
@@ -133,7 +133,7 @@ If you do not require assistance, you have 30 seconds to cancel the alert by pre
     c.	Press and hold the acknowledgement button until the alarm pattern is silenced (approximately 3 seconds).
     The device will return to regular operation
 
-    d. <img src="img/../pass_img-6.jpg"> Silencing an alarm will not cancel the call, 5555 will still intervene.
+    d. <img src="img/pass_img-6.jpg"> Silencing an alarm will not cancel the call, 5555 will still intervene.
 
 ### 3. No-motion alert
 
@@ -157,7 +157,7 @@ If you do not require assistance, you have 30 seconds to cancel the alert by pre
     c.	Press and hold the acknowledge button until the alarm pattern is silenced (approximately 3 seconds).
     The device will return to regular operation.
 
-    d. <img src="img/../pass_img-6.jpg"> Silencing an alarm will not cancel the call, 5555 will still intervene.
+    d. <img src="img/pass_img-6.jpg"> Silencing an alarm will not cancel the call, 5555 will still intervene.
 
 ### 4. Voice call alert
 

utilization-of-balances/utilization-of-balances.md

@@ -25,19 +25,19 @@ There are such balances on the 5th floor in BT1 and on the 2nd floor in BT2.
 **XPE205DR: used for 1.4 mg to 220 g**
 
 <div align="center">
-<img src="XPE205DR.jpg" height="400">
+<img src="img/XPE205DR.jpg" height="400">
 </div>
 
 **XS4002S: used for 800 mg to 4.1 kg**
 
 <div align="center">
-<img src="XS4002S.jpg" height="400">
+<img src="img/XS4002S.jpg" height="400">
 </div>
 
 1. For XPE balances, check that the air bubble is in the middle of the circle.
    It is located on the rear right foot of the instrument.
    <div align="center">
-   <img src="XPE205DR_2.jpg" height="400">
+   <img src="img/XPE205DR_2.jpg" height="400">
    </div>
 2. Switch on the balance by pressing on “On/Off” until the display appears.
 3. In order to allow an equilibration of electronics within the balance, allow it to stand for 10 to 15 minutes before starting using it.
@@ -49,7 +49,7 @@ There are such balances on the 5th floor in BT1 and on the 2nd floor in BT2.
 **Ergo clip**:
 
 <div align="center">
-<img src="Ergo-Clip_2.jpg" height="400">
+<img src="img/Ergo-Clip_2.jpg" height="400">
 </div>
 
 7.	Tare the balance by pressing on “T”
@@ -71,7 +71,7 @@ There are such balances on the 5th floor in BT1 and on the 2nd floor in BT2.
     * Wipe the surfaces with a brush
     * Wipe the weighing pan with a damp cloth
     * If some powder fell off the pan, carefully remove the crown around the pan and clean it to remove any residue. If you need assistance, contact the instrument responsible person
-    <img src="Crown.jpg" height="400">
+    <img src="img/Crown.jpg" height="400">
     * When the crown is removed, carefully wipe with a damp cloth around the weighing pan
     * Carefully place the crown back
     * Always wipe the area around the balance with 70 % ethanol to remove any substance